Skype

About Oak herringbone flooring


limed oak- herringbone



Common Specifications of Engineered Oak Herringbone Flooring


USAGE Commercial and Residential applications
Product Reference CIS/SM
Width x Thickness 120 x 14.5mm
Board Type Engineered, Tongue & Grooved
Pattern 1-Strip Plank Herringbone Wood Flooring
Pack Length 600mm
Top Layer 2-4mmEuropean Oak Lamella
Timber Grade Select
Backing Eucalyptus Plywood
Surface Finish Brushed & Matt Lacquered
Environmental Rating A +


OAK ENGINEERED HERRINGBONE FLOORS INSTALLATION METHODS
Fully Bonded Yes
Nailed No
Floated on underlay Yes(Recommended)
Over Under Floor Heating Yes
* Subject to compatible subfloor and correct installation (see Installation Guidelines) including sensors.
# Temperature of top-face must never be allowed to exceed 27°C.  UFH protocol to control temperature conditions is recommended.
GRADING CRITERIA
Maximum Size of sound knots Max 20mm ø Allowed
Maximum Size of Broken knots Max 10mm ø Allowed (3 per board)
Filled Defects Allowed
Heart / Pith Not Allowed
Sapwood Not Allowed
End Checks Not Allowed
Insect damage Not Allowed
Filler Allowed
Colour variation Allowed
Small shakes Not Allowed
Ingrown bark Not Allowed
N.B. The product grading criteria is an approximation.  Please allow for variants.
Origin Top Layer - France / Base Layer - China
EUTR Legally Harvested Timber
FSC Please ask for assistance
PEFC Not available
Janka Hardness Rating (Oak) 1,360 lbf (6,000N)
Formaldehyde Emission Class E1 (˂ 0.01 ppm) EN 717-1
Pentachlorophenol PCP free
Slip Testing USRV 43 CEN/TS 15676
European reaction to fire classification Class Cfl s1 EN13501-1
Wear Resistance Class 4
Cigarette Burns Repairable
Resistance to chemical agents Good
Acoustic Properties Contact Complete Interior Solution Technical Dept.

Displaying 1 to 13 ( of 13 products)
Displaying 1 to 13 ( of 13 products)